Makita M0921 230mm Angle...
Reference: 13040048- Power: 2200W
- No Load Speed: 6600 rpm
- Disc Diameter: 230mm
- Spindle Lock
- 2 Years Warranty
Disc Not Included
mths
@
Rs
List of products by brand Makita
- Power: 2200W
- No Load Speed: 6600 rpm
- Disc Diameter: 230mm
- Spindle Lock
- 2 Years Warranty
Disc Not Included
Show more
- Power: 840W
- No Load Speed: 0-11000 rpm
- Disc Diameter: 115mm
- Spindle Lock
- 2 Years Warranty
Disc Not Included
Show more
- Power: 800W
- Voltage: 240V
- No Load Speed: 0-1200 rpm
- Impact Energy: 2.4 J
- Drilling Capacity: Concrete: 26mm, Wood: 32mm, Steel: 13mm
- 2 Years Warranty
Show more
- Power: 850W
- No Load Speed: 0-11000 rpm
- Disc Diameter: 115mm
- Spindle Lock
- 2 Years Warranty
Disc Not Included
Show more
- Power: 680W
- Voltage: 110V
- No Load Speed: 0-2800 rpm
- Drilling Capacity: Concrete: 16mm, Steel: 13mm, Wood: 30mm
- 2 Years Warranty
Show more
Makita Battery Pack Including:
- 4 batteries 5.0amp
- Port charger DC18RD
- 2 Years Warranty
Show more
- Charger 2 Port
Show more
- Battery 5.0AMP
Show more
- Voltage: 2x18V
- No Load Speed: High/Low: 6500/5000 rpm
- Trimmer Head: 350mm
- Cutting Diameter: 350mm
- Spindle Size: M8 x 1.25RH
- Vibration Level: Front/Rear: 2.5/2.5 m/s2 or less
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 2x18V
- Strokes Per Minute: 2000-3-600 spm
- Blade Length: 550mm
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 2x18V
- Guide Bar Length: 250mm (10")
- Chain Pitch: 3/8"
- Chain Gauge: 1.3mm
- Chain Speed: 8.3 m/s
- Chain Oil Tank Volume: 85mL
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 2x18V
- Brushless Motor
- Variable Speed Control by trigger
- Constant speed control
- Oil Capacity Display
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 2x18V
- No Load Speed: 10000-17000 rpm
- Max Blowing Rate: 2.3-4.4 m3/min
- Air Speed: 57-93m/s
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 18V
- No Load Speed: 7800 rpm
- BL Motor Delivers: 6000 rpm
- Disc Diameter: 230mm
- Battery and Charger Not Included
- 2 Years Warranty
Disc Not Included
Show more
- Voltage: 18V
- No Load Speed: 0-2100 rpm
- Impact Per Minute: 0-31500ipm
- Max Torque: 125Nm
- Mechanical 2 Speed Gear
- Drilling Capacity: Steel: 13mm, Wood: 76mm, Masonry: 16mm
- 2 Years Warranty
Show more
- Battery 3.0AMP
Show more
- Voltage: 18V
- No Load Speed: 0-2100 rpm
- Max Torque: 230Nm
- Fastening Capacities: Standard Bolt: M10-M20 (3/8"-3/4")
- High Tensile Bolt M10-M14 (3/8"-9/16")
- Square Drive: 12.7mm (1/2")
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 18V
- No Load Speed: 250-500 rpm
- Blows Per Minute: 1450-2900bpm
- Impact Energy: 11.4 J
- Drilling Capacity: Concrete (w/T.C.T bit): 40mm, Concrete (w/Core bit): 105mm
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 18V
- Length Of Stroke: 26mm
- Strokes Per Minute: 0-2600spm
- Cutting Capacity: Wood: 135mm, Steel: 10mm
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 18V
- No Load Speed: 4400 rpm
- Disc Diameter: 260mm
- Cutting Capacity: 90°: 91x279 mm, 45°: 68x218 mm
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 18V
- No Load Speed: 5000 rpm
- Disc Diameter: 165mm
- Miter Angle: 52L/52R
- Bevel Angle: 46L/46R
- Cutting Capacity: 0°: 46x92mm, 45°: 46x65mm
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Voltage: 18V
- No Load Speed: 5700 rpm
- Disc Diameter: 190mm
- Cutting Capacity: 0°: 52x300mm, 45°: 40x300mm
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Staple Length/Gauge: 0.5 x 0.7 mm
- Staple Magazine Capacity: 150
- Staple range: 7,10 mm
- Noise Sound Pressure: 76 dB(A)
- Noise K factor: 3 dB(A)
- Battery and Charger Not Included
Show more
- Voltage: 18V
- Capacity: Steel: M6-M10 mm (W 3/8")
- Vibration Level: Cutting threaded stainless steel rod (rod size W 3/8") 2.5 m/s² or less
- Battery and Charger Not Included
Show more
- Voltage: 18V
- No Load Speed: 10000-30000 rpm
- Plunge Capacity with Trimmer Base: 0-40mm
- Plunge Capacity with Plunge Base: 0-35mm
- Battery and Charger Not Included
- 2 Years Warranty
Show more
- Power: 710W
- No Load Speed: 0-1100 rpm
- Impacts Per Minute: 0-4350ipm
- Drilling Capacity: Concrete: 22mm, Steel: 13mm, Wood: 32mm
- 2 Years Warranty
Show more
- Charger 1 Port
Show more
- Power: 500W
- No Load Speed: 0-2900 rpm
- Impacts Per Minute: 0-43500ipm
- Drilling Capacity: Concrete: 16mm, Steel: 13mm, Wood: 20mm
- 2 Years Warranty
Show more
- Power: 450W
- Dust Ejection Facility
- Steel Base
- Trigger Switch
- 2 Years Warranty
Show more
- Power: 1650W
- No Load Speed: 4600 rpm
- Disc Diameter: 255mm
- Cutting Capacity: 90°: 90.5x95mm, 45°: 0.5x67mm
- 2 Years Warranty
Show more
- Power: 2200W
- No Load Speed: 0-6000 rpm
- Disc Diameter: 230mm
- 2 Years Warranty
Disc Not Included
Show more
C&C and CD Available
- Power: 1200W
- No Load Speed: 0-14500 rpm
- Blade Diameter: 110mm
- Cutting Capacity: 34mm
- 2 Years Warranty
Show more
C&C and CD Available
- Power: 450W
- Voltage: 240V
- Dust Extraction Facility
- Aluminium Base & Chip Cover
- Trigger Switch
- 2 Years Warranty
Show more
C&C and CD Available
- Power: 190W
- Orbits Per Minute: 12000 opm
- Orbit Diameter: 2mm
- Pad Size: 92x185mm
- With Dust Extractor
- 2 Years Warranty
Show more
C&C and CD Available
- Power: 430W
- No Load Speed: 0-3000 rpm
- Capacity in Steel: 13mm, Wood: 18mm, Concrete: 13mm
- Impact per Minute: 0-33000
- Net Weight: 1.8kg
- Power Supply Cord: 2 m
- 2 Years Warranty
Show more
On Display Only
- Power: 1500W
- No Load Speed: 0-4200 rpm
- Disc Diameter: 255mm
- Cutting Capacity: 0°: 75x130mm, 45°: 75x90mm
- 2 Years Warranty
Show more
C&C and CD Available
- Power: 900W
- Impacts Per Minute: 2900ipm
- Impact Energy: 7.2 J
- 17mm Hex Shank
- 2 Years Warranty
Show more
On Display Only
Easy Pack Includes:
- Hammer Drill M0801K
- Angle Grinder M9510
- Drill Bits D-16405
- Grinding Disc B46252
- Makita Cap
- 2 Years Warranty
Show more
C&C and CD Available
- Power: 2000W
- No Load Speed: 4100 rpm
- Disc Diameter: 235mm
- Cutting Capacity: 90°: 85mm, 45°: 60mm
- 2 Years Warranty
Show more
C&C and CD Available
- Voltage: 18V
- No Load Speed: 0-400/0-1400 rpm
- Max Torque: Hard 42Nm / Soft 24Nm
- Max Impact Rate: 0-6000/0-21000
- Drilling Capacity: Concrete: 13mm, Steel: 13mm, Wood: 36mm
- Includes: 2 x 1.5Ah Battery & 1 x Charger
- 2 Years Warranty
Show more
On Display Only
- Voltage: 12V
- No Load Speed: 0-680 rpm
- Impacts Per Minute: 0-4800ipm
- Impact Energy: 1.1 J
- Drilling Capacity: Concrete: 16mm, Wood: 13mm, Steel: 10mm
- 2 Years Warranty
Show more